- Contact Person : Mr. Chia Eric
- Company Name : Ningbo Glorie Nylon Technology Co., Ltd.
- Tel : 86-574-62935691
- Fax : 86-574-62530309
- Address : Zhejiang,Yuyao,Plastic city , Z 1501A
- Country/Region : China
- Zip : 315412
pa6 - Heat Stabilized
Related Product Searches:pa6 - Heat Stabilized,High Quality,pa6, PA6 Heat stabilized,50H
ORACLE 50H is an unreinforced, heat stabilized, pigmented black, low viscosity, general purpose injection molding PA6 exhibiting excellent fluidity for filling thin sections. It possesses the combination of strength, and toughness properties as well as excellent chemical, thermal and abrasion resistance. The heat stabilizer system extends its retention of properties at elevated temperatures.
| TEST ITEMS | TEST METHOD AND CONDITIONS | TEST RESULTS | ||
| TEST METHOD | UNIT | CONTITIONS | ||
| (DRY)23 | ||||
| Density | ISO1183 | g/cm3 | 1.1 | |
| Melt Volume Rate | ISO1133 | cc/10min | (275)2.16kg | 15.8 |
| Tensile Strength | ISO527 | MPa | 10mm/min | 65.4 |
| Tensile strain at break | ISO527 | % | 28 | |
| Flexural Modulus | ISO178 | MPa | 2,600 | |
| Flexural Strength | ISO178 | MPa | 2mm/min | 79 |
| Charpy Notched | ISO179 | KJ/m2 | 2.9m/s-1J | 13.5 |
| Izod Notched Impact | ISO180 | KJ/m2 | 3.5m/s-1J | 8.3 |
| Flame resistance | UL-94 | V-0 | ||
| Processing Guidelines | ||||
| Material HandlingMax. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient | ||||
| Typical ProfileMelt Temperature 220-250°C (428-482 °F) Mold Temperature 60-90 °C (158-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi) | ||||
| Fill RateFast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate | ||||
We direct our energies to offer users the high-performance, consistent-quality ,cost-saving nylon. Each batch have to pass strict test before they go out .
ORACLE provide six series polyamides resin to serve users a wide range of needs
>>> General Purpose Homopolymer
>>> Reinforced nylon resin(Glass-reinforced and/or Mineral-reinforced)
>>> Flame Retarded
>>> Friction&Wear resistance
>>> Impact resistance
>>> Special applications
Contact us for further information, general guides and/or additional information about ventilation
polyamide 6 PA6
PS: ORACLE nylon products are mainly used to make high quality and reliable products. we don't offer recycled or/and cheap and nasty nylon material
pa6 - Heat Stabilized
